Tackle up for the Norfolk Broads rivers

I recently received an email from somebody looking to come back to coarse fishing, specifically to fish the tidal rivers Bure and Yare. They are looking for advice on what rods and reels would be most suitable. Instead of replying direct I thought it might be interesting to make it in to a post.

The River Bure and River Yare are big tidal rivers, at spring tides there can be a tide running at 3 knots in places so they are not the place for small light weight feeder rods. If you are feeder fishing, especially when targeting the large bream shoals you need a strong rod.

My advice would be it needs to be a minimum of 13ft long, if not 14 or 15ft, this allows you to set the rod high on a rest keeping as much of the line out of the tide as possible (the longer the line, the higher you can set the rod and more line is kept out of the water). This prevents the rod taking on a massive bend due to the water pressure on the line.

Like I previously mentioned the rod needs to be strong. Most suitable rods will be described by the maufacturer as heavy feeder rods. Ideally it will have a number of different sized quiver tips allowing you to choose the most suitable tip for the current conditions, the stronger the tide the heavier the tip. It is not uncommon for me to be using 2-3oz cage feeders just to keep the bottom so a strong tip will be required, quite often at least a 3oz tip. You will get no where with a 1oz tip, except for a huge bend in your rod and many missed bites.

Norfolk Broads river Bream are not shy so you can get away with a 5lb main line, sometimes all the way through but I often use a 3lb hook link.

I use a Tri-cast 14ft TROPHY DUTCH FEEDER rod, at £250 they are not cheap but they certainly do the job required. Also look at the Preston Dutch Master range or the Shimano Technium heavy feeder rod  If that’s out of your budget look at the Shakespeare Mach 1 XT or any heavy feeder rods by the likes of Preston, Daiwa, Tri-cast, shakespeare etc.  You will most likely strugle to find most of these in any tackle shops these days which are generally set up for carp anglers with 11ft rods that are no good for big river fishing.  not sure if they still make this but ebay is well worth checking regularly as these rods do come up.

As for a reel, I don’t think you can go wrong with a Shakespere Mach 3 XT 040 (again look on ebay where at the time of writing they are going for about £60). They are by no means the most expensive reels available, yet in my opinion they are top quality and you get a double handle option, spare spools and reel case. Just don’t opt for smaller match reels as after a while they just wont be able to cope with the strains of large river fishing.

A guide to choosing the correct quivertip

These days, most feeder/quiver rods are supplied with multiple quivertips of different sizes and it comes as no surprise that some anglers are confused as to which one they should use on the day, just walking the banks of the tidal river Yare in Norfolk sees anglers with bends in their rods that a 4lb Bream would be happy to inflict, I dread to know how many bites these anglers are missing, read on to make sure you select the correct tip next time your on the bank.

Different strengths
Those different tips that came with the rod will be rated with different test curves, the test curve being the weight needed to bend the tip through 90 degrees. The smaller/lower the number, the more sensitive the tip will be, so it goes without saying that the higher the number the stronger and less sensitive the tip will be.

Different materials
Modern quivertips are generally made from either glassfibre or carbon. The sensitive and therefore lower test curve tips are usually glassfibre (coming in test curves between 0.5oz and 2.5oz) while the higher test curve tips are usually made from carbon and can be found going right up to test curves of 6oz.

How do I tell what test curve each quivertip is?
Now that is a good question, the majority of modern tips will have the test curve written on them, however some rely on a colour coded system which unfortunately is not standardised accross manufacturers, so a green tip for one manufacturer will not be the same test curve as another. In these cases a quick search on the internet can often come up trumps or a telephone call to the manufacturer and don’t forget your local tackle shop as there is a wealth of knowledge available.

When and what quivertip should I use
Here is a quick guide to start you off but don’t be afraid to experiment.

0.5oz to 1oz
These quivertips are ideal for silver fish such as roach and rudd and are very sensitive (remember the lower the test curve the more sensitive it is). They are mostly used with very small feeders, such as maggot feeders on small rivers with little to no flow or close in work on ponds/lakes where large casts are not required.

1.5oz to 2oz
Thses quivertips are slightly more stiff and are ideal for casting larger feeders over medium distances on rivers where there is a bit of a flow or a larger cast is required, or on lakes where silver fish, bream or small carp are your quary.

2.5oz to 3.5oz
Now we are getting bigger, these tips are ideal for situations that require longer range casting and where tench, carp and large bream are your intended species. These size tips are also useful when fishing fast rivers for chub and small barbel.

> 4oz
Very strong and stiff, these tips are ideal for Method feeder fishing where the weight of the feeder requires a strong tip to ensure accurate casting without fear of breakages. Also ideal for big carp and barbel and where rivers are very fast or in flood. These sized tips usually accompany specialist rods, specifically designed for specimen fishing.

One final tip, don’t forget it is not just the intended species of fish that you are trying to match to the tip but also the venue and conditions you are fishing, I quite often end up using a 2.5oz to 3oz tip on the tidal river Yare and Bure due to the strength of the tide and the size of the feeder that is required to hold bottom (quite often a 2.5oz feeder), It is all part of a balancing act, making sure you pick a tip that is capable of handling the size of feeder or bomb, the required casting distance and the actual size of the fish you expect to catch while still making sure the tip is capable of registering shy bites. Use the above as a guide and get out there and experiment.